Cooperation cases
600T straightener
- Categories:Cooperation cases
- Author:
- Origin:
- Time of issue:2022-08-28 15:42
- Views:
(Summary description)The aluminum straightener is mainly used to straighten the profiles to prevent their secondary deformation. According to the different clamping methods of the jaw, it can be divided into manual clamping, pneumatic clamping and hydraulic clamping; The company adopts reverse pull design, and the pull force can range from 15T to 3000T. It can also make equipment above 3000T according to customer requirements.
600T straightener
(Summary description)The aluminum straightener is mainly used to straighten the profiles to prevent their secondary deformation. According to the different clamping methods of the jaw, it can be divided into manual clamping, pneumatic clamping and hydraulic clamping; The company adopts reverse pull design, and the pull force can range from 15T to 3000T. It can also make equipment above 3000T according to customer requirements.
- Categories:Cooperation cases
- Author:
- Origin:
- Time of issue:2022-08-28 15:42
- Views:
| Equipment related parameters | |
| 1、Tensile force | 6MN |
| 2、Stretching stroke of master cylinder | 1100mm |
| 3、Main cylinder stretching speed | 22mm/s |
| 4、Return speed of master cylinder | 106mm/s |
| 5、The maximum length of stretched products | 14m |
| 6、Minimum length of stretched products | 1.5m |
| 7、Maximum width of stretched products | 600mm |
| 8、Maximum height of stretched products | 350mm |
| 9、Rear lock hole spacing 380mm | 380mm |
| 10、Operating pressure of system | 21Mpa |
| 11、Total power of equipment motor | 200KW |
| 12、Total weight of equipment | 128T |
1
Service hotline：
Address: Boshan Boai, Nanhai District, Foshan, Guangdong
Minghong MachineryOfficial enterprise WeChat