Cooperation cases
800T straightener
- Categories:Cooperation cases
- Author:
- Origin:
- Time of issue:2022-08-28 15:41
- Views:
(Summary description)The aluminum straightener is mainly used to straighten the profiles to prevent their secondary deformation. According to the different clamping methods of the jaw, it can be divided into manual clamping, pneumatic clamping and hydraulic clamping; The company adopts reverse pull design, and the pull force can range from 15T to 3000T. It can also make equipment above 3000T according to customer requirements.
800T straightener
(Summary description)The aluminum straightener is mainly used to straighten the profiles to prevent their secondary deformation. According to the different clamping methods of the jaw, it can be divided into manual clamping, pneumatic clamping and hydraulic clamping; The company adopts reverse pull design, and the pull force can range from 15T to 3000T. It can also make equipment above 3000T according to customer requirements.
- Categories:Cooperation cases
- Author:
- Origin:
- Time of issue:2022-08-28 15:41
- Views:
| Equipment related parameters | |
| 1、Tensile force | 8MN |
| 2、Stretch stroke of master cylinder | 1150mm |
| 3、Master cylinder stretching speed | 11mm/s |
| 4、Return speed of master cylinder | 90mm/s |
| 5、The maximum length of stretched products | 8m |
| 6、Minimum length of stretched products | 2.2m |
| 7、Maximum width of stretched products | 800mm |
| 8、Maximum height of stretched products | 400mm |
| 9、The distance between the rear lock holes | 500mm |
| 10、Operating pressure of system | 21Mpa |
| 11、Total power of equipment motor | 270KW |
| 12、Total weight of equipment | 138T |
1
Service hotline：
Address: Boshan Boai, Nanhai District, Foshan, Guangdong
Minghong MachineryOfficial enterprise WeChat